Petsafe Deluxe Patio Panel Pet Door Manuel d'utilisateur télécharger pdf (Page 7)

6 1-800-732-2677

www.petsafe.net 7

Using the Closing Panel

The Closing Panel attaches to the inside of the Deluxe

Patio Panel.

During inclement weather, or to keep your pet from using

the door, place the closing panel in the track on the inside

of the Deluxe Patio Panel.

_______________________________________________

Lock Installation

Important: Drilling holes into your door frame may void the warranty on your

frame. Please refer to your door manufacturer’s warranty before drilling.

1. Determine location for Latch Assembly at a convenient height from ﬂoor.

2. Slide patio (house) door and Patio Panel tightly together.

3. Using template provided, align vertical center line on template with door mating line

(keeping “latch” side of template to the RIGHT) and mark location for four (4) mounting

screws (1A).

4. Remove template and inspect location of holes on patio (house) door to determine if there

is a possibility that location will allow drill bit to contact glass inside door. This is only

required if the “latch” portion is mounted to the patio (house) door.

5. Drill four (4) 7/64” dia. mounting holes using drill bit provided. DO NOT drill completely

through either door (1B).

6. Secure the “latch” and “keeper” with the four (4) #6 x 3/4” ﬂat head sheet metal screws

provided. DO NOT overtighten (1C). Recommended torque is 8-10 ft/lbs.

7. If over tightening results in stripped connection, you may do one of the following:

a. Move latch slightly up or down and re-drill mounting holes.

b. Drill existing holes to a larger size and install a plastic anchor (not provided) for a #6 screw.

Plastic anchors can be purchased at any local hardware or home improvement store.

DOOR MATING LINE

KEEPER

LATCH

Patio

Panel

V e rtical

Center Line

Patio

Panel

Patio

Panel

Step

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Pas de commentaire

Petsafe Deluxe Patio Panel Pet Door Manuel d'utilisateur Page 7